Torque tools, gauges, micrometers, calipers, scales and crimp tools.
Torque and dimensional tools calibrated for engineering, manufacturing and maintenance teams.
All calibration is traceable to national standards and carried out under our ISO 9001 quality management system.
Don't see your instrument? Ask us. We calibrate many more makes and models than we can list here.
Torque wrenches, micrometers, calipers and gauges are used to make sure parts are assembled and made correctly. An under-reading torque wrench can leave a joint loose, and an over-reading one can strip threads or damage components. Crimp tools that are out of tolerance can produce poor electrical connections that fail later.
The torque tool standard BS EN ISO 6789 recommends recalibrating a torque wrench every 12 months or every 5,000 cycles, whichever comes first, or sooner if it has been overloaded or dropped. Micrometers, calipers, gauges and scales are usually calibrated annually, or more often if your quality system requires it.
All work is carried out under our ISO 9001 quality management system. UKAS-accredited calibration is available on request through our UKAS-accredited partner laboratory.
Yes, along with torque wrenches up to and over 1 metre and torque calibrators.
Yes. Send micrometers, calipers, gauges and scales together and they will come back with individual certificates.
At any Calibration Point partner branch. We collect from there and usually return within 3 to 5 working days.
